There are many products that can be filled by the YT-300 Automatic cup filling and sealing machine, liquid, powder, granules, and paste can be filled and sealed, but the filling speed will be different. In order to make the filling faster, it is recommended to use multiple filling heads, so today the professional manufacturer of JYD Machine will also share some debugging tips for automatic filling and sealing machines, hoping to help you.

Debugging tips for automatic filling and sealing machine

1. Adjust the nut of the YT-300 Automatic cup filling and sealing machine and adjust the screw so that the position of the lower fixing rod changes accordingly. Therefore, the push-pull length of the syringe is also changed, so as to achieve the purpose of free adjustment of the dispensing volume.
2. After the YT-300 Automatic cup filling and sealing machine is adjusted, tighten the nut immediately so that the lower fixing rod and the crank are firmly fixed.
3. Loosen the nut of the filling machine, and determine the correct position of the upper fixing rod according to the push-pull length of different syringes. After the lower fixing rod is adjusted, turn the crank to turn the syringe to the top dead center, then lift the outer sleeve of the syringe up about 2mm to prevent the needle tube from being broken, and then tighten the nut before starting the machine.
4. After the YT-300 Automatic cup filling and sealing machine is assembled correctly, turn on the switch. When the machine is working, the crank drives the syringe up and down to draw liquid, adjust the speed knob, select the appropriate dispensing speed, and start to work normally. Adjust the governor knob, the clockwise dispensing speed is fast, otherwise, the speed is slow.

This is the end of the introduction to the relevant knowledge of the debugging tips of the YT-300 Automatic cup filling and sealing machine. If you still have any questions, please contact us for consultation. JYD Machine also offers a variety of paper machines, paper tube machines, filling machines, etc. Welcome to buy.